116 lines
3.8 KiB
C
116 lines
3.8 KiB
C
// Copyright 2022 Stefan Kerkmann
|
|
// Copyright 2020 Jack Humbert
|
|
// Copyright 2020 JohSchneider
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
// Audio Driver: PWM the duty-cycle is always kept at 50%, and the pwm-period is
|
|
// adjusted to match the frequency of a note to be played back. This driver uses
|
|
// the chibios-PWM system to produce a square-wave on specific output pins that
|
|
// are connected to the PWM hardware. The hardware directly toggles the pin via
|
|
// its alternate function. see your MCUs data-sheet for which pin can be driven
|
|
// by what timer - looking for TIMx_CHy and the corresponding alternate
|
|
// function.
|
|
|
|
#include "audio.h"
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#if !defined(AUDIO_PIN)
|
|
# error "Audio feature enabled, but no pin selected - see docs/feature_audio under the ARM PWM settings"
|
|
#endif
|
|
|
|
#if !defined(AUDIO_PWM_COUNTER_FREQUENCY)
|
|
# define AUDIO_PWM_COUNTER_FREQUENCY 100000
|
|
#endif
|
|
|
|
extern bool playing_note;
|
|
extern bool playing_melody;
|
|
extern uint8_t note_timbre;
|
|
|
|
static PWMConfig pwmCFG = {.frequency = AUDIO_PWM_COUNTER_FREQUENCY, /* PWM clock frequency */
|
|
.period = 2,
|
|
.callback = NULL,
|
|
.channels = {[(AUDIO_PWM_CHANNEL - 1)] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}}};
|
|
|
|
static float channel_1_frequency = 0.0f;
|
|
|
|
void channel_1_set_frequency(float freq) {
|
|
channel_1_frequency = freq;
|
|
|
|
if (freq <= 0.0) {
|
|
// a pause/rest has freq=0
|
|
return;
|
|
}
|
|
|
|
pwmcnt_t period = (pwmCFG.frequency / freq);
|
|
chSysLockFromISR();
|
|
pwmChangePeriodI(&AUDIO_PWM_DRIVER, period);
|
|
pwmEnableChannelI(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1,
|
|
// adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH
|
|
PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100));
|
|
chSysUnlockFromISR();
|
|
}
|
|
|
|
float channel_1_get_frequency(void) {
|
|
return channel_1_frequency;
|
|
}
|
|
|
|
void channel_1_start(void) {
|
|
pwmStop(&AUDIO_PWM_DRIVER);
|
|
pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG);
|
|
}
|
|
|
|
void channel_1_stop(void) {
|
|
pwmStop(&AUDIO_PWM_DRIVER);
|
|
}
|
|
|
|
static virtual_timer_t audio_vt;
|
|
static void audio_callback(virtual_timer_t *vtp, void *p);
|
|
|
|
// a regular timer task, that checks the note to be currently played and updates
|
|
// the pwm to output that frequency.
|
|
static void audio_callback(virtual_timer_t *vtp, void *p) {
|
|
float freq; // TODO: freq_alt
|
|
|
|
if (audio_update_state()) {
|
|
freq = audio_get_processed_frequency(0); // freq_alt would be index=1
|
|
channel_1_set_frequency(freq);
|
|
}
|
|
|
|
chSysLockFromISR();
|
|
chVTSetI(&audio_vt, TIME_MS2I(16), audio_callback, NULL);
|
|
chSysUnlockFromISR();
|
|
}
|
|
|
|
void audio_driver_initialize(void) {
|
|
pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG);
|
|
|
|
// connect the AUDIO_PIN to the PWM hardware
|
|
#if defined(USE_GPIOV1) // STM32F103C8, RP2040
|
|
palSetLineMode(AUDIO_PIN, AUDIO_PWM_PAL_MODE);
|
|
#else // GPIOv2 (or GPIOv3 for f4xx, which is the same/compatible at this command)
|
|
palSetLineMode(AUDIO_PIN, PAL_MODE_ALTERNATE(AUDIO_PWM_PAL_MODE));
|
|
#endif
|
|
|
|
chVTObjectInit(&audio_vt);
|
|
}
|
|
|
|
void audio_driver_start(void) {
|
|
channel_1_stop();
|
|
channel_1_start();
|
|
|
|
if ((playing_note || playing_melody) && !chVTIsArmed(&audio_vt)) {
|
|
// a whole note is one beat, which is - per definition in
|
|
// musical_notes.h - set to 64 the longest note is
|
|
// BREAVE_DOT=128+64=192, the shortest SIXTEENTH=4 the tempo (which
|
|
// might vary!) is in bpm (beats per minute) therefore: if the timer
|
|
// ticks away at 64Hz (~16.6ms) audio_update_state is called just often
|
|
// enough to not miss any notes
|
|
chVTSet(&audio_vt, TIME_MS2I(16), audio_callback, NULL);
|
|
}
|
|
}
|
|
|
|
void audio_driver_stop(void) {
|
|
channel_1_stop();
|
|
chVTReset(&audio_vt);
|
|
}
|