History

Joel Challis 831deac212 Migrate build target markers to keyboard.json (#23293 )		2024-03-30 11:31:50 +00:00
..
keymaps	[Keyboard] Add support for EnviousDesign keyboards (#17544 )	2023-10-12 14:07:42 -07:00
keyboard.json	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
readme.md	[Keyboard] Add support for EnviousDesign keyboards (#17544 )	2023-10-12 14:07:42 -07:00

readme.md

EnvKB 65M

A low cost 65% kit featuring split space and an attempt at fitting a standard keycap set.

Keyboard Maintainer: Envious-Data
Hardware Supported: EnvKB 65M (Pi Pico)
Hardware Availability: Mechboards, GitHub

Make example for this keyboard (after setting up your build environment):

make enviousdesign/65m:default

Flashing example for this keyboard:

make enviousdesign/65m:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
Physical reset: Hold down the BOOTSEL button on the Pi Pico, then either plug the board in or press the RESET button.
Keycode in layout: Press the key mapped to QK_BOOT. In the pre-supplied keymaps it is on the second layer, replacing the Control key in the bottom-left.

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.