mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/cannonkeys/ripple
History
Ryan 522048725f
Move RGB_MATRIX_DRIVER to data driven (#20350)
2023-04-08 18:08:08 +10:00
..
keymaps Add Ripple TKL Keyboard firmware (#20301) 2023-04-04 08:56:12 +10:00
config.h Add Ripple TKL Keyboard firmware (#20301) 2023-04-04 08:56:12 +10:00
halconf.h Add Ripple TKL Keyboard firmware (#20301) 2023-04-04 08:56:12 +10:00
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
mcuconf.h Add Ripple TKL Keyboard firmware (#20301) 2023-04-04 08:56:12 +10:00
readme.md Add Ripple TKL Keyboard firmware (#20301) 2023-04-04 08:56:12 +10:00
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

CannonKeys Ripple

Ripple Keyboard by Upas

  • Keyboard Maintainer: Andrew Kannan
  • Hardware Supported: STM32F072CBT6

Make example for this keyboard (after setting up your build environment):

make cannonkeys/ripple:default

Flashing example for this keyboard:

make cannonkeys/ripple:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Toggle the switch on the back of the pcb to "1" and briefly press the button on the back of the PCB
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available