qmk_sweep_skeletyl/keyboards/hardwareabstraction/handwire

Hardware Abstraction Handwire

A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer.

• Keyboard Maintainer: Andy Tsai
• Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
• Hardware Availability: https://hardwareabstraction.com

Make example for this keyboard (after setting up your build environment):

make hardwareabstraction/handwire:default

Flashing example for this keyboard:

make hardwareabstraction/handwire:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers.
• Keycode in layout: Press the key mapped to QK_BOOT if it is available. This can be configured in VIA or on the QMK configurator.