mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/meck_tkl
History
Joel Challis 2757251218
Specify blackpill board files where relevant (#17521)
2022-07-01 15:38:57 +01:00
..
blackpill_f401 Specify blackpill board files where relevant (#17521) 2022-07-01 15:38:57 +01:00
keymaps/default [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00
config.h Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
info.json [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00
meck_tkl.c [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00
meck_tkl.h [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00
readme.md [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00
rules.mk [Keyboard] Add Meck TKL handwired (#15533) 2022-01-09 09:44:33 -08:00

readme.md

meck_tkl

meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

Wiring instructions

  • On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
    • USB-related pins: PA10, PA11, PA12
    • BOOT1 pin: PB2

Sample wiring:

wiring