History

Ryan 47966dc2a6 Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )		2023-04-06 18:00:54 +10:00
..
keymaps	Remove legacy international keycodes (#18588 )	2022-10-09 14:51:09 +11:00
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
info.json	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
qoolee.h	[Keyboard] Add new keyboard "QooLee" (#14977 )	2021-10-31 01:17:38 -07:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

qoolee

QooLee is a keyboard with a 30% layout with ISO Enter. It can also be equipped with a rotary encoder. It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs. VIA (Remap) firmware is also available.

Keyboard Maintainer: takashicompany
Hardware Supported: PCB, Pro Micro
Hardware Availability: https://github.com/takashicompany/qoolee

Make example for this keyboard (after setting up your build environment):

make takashicomoany/qoolee:default

Flashing example for this keyboard:

make takashicompany/qoolee:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available