History

Nick Brassel 154d35ac14 Remove `UNUSED_PINS` (#17931 )		2022-08-06 23:23:35 +10:00
..
keymaps	[Keymap] 3w6 helltm keymap combos (#15393 )	2021-12-07 12:00:31 -08:00
rev1	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
rev2	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
readme.md	[Keyboard] add 3w6 (#13746 )	2021-08-19 11:13:00 -07:00

readme.md

3W6

The 3w6 is a low profile, split ortholinear keyboard with 36 keys.

I needed a keyboard for work and wasn't really satisfied with the available alternatives (namely Corne, Kyria and Ferris), mostly because they are either rather large and/or don't have the spacing I would like.

The 3w6 is designed to be a simple, realiable, cheap and small keyboard to be taken everywhere.

There are currently two revisions:

Rev1:
- onboard microcontroller (ATMega32U4)
- USB-C connector Board <-> PC
- USB-C connectors between both split halfs
- choc spacing (18x17mm)
- aggressive pinky stagger
- support for Choc V1 switches
Rev2:
- everything Rev1 did
- additional middle plate (2mm)
- support for Pimoroni Trackball instead of outer thumb switch on right half, needs midplate
- mounting holes for Tenting Puck, only usable without mid or switchplate

Keyboard Maintainer: weteor
Hardware Supported:
- 3w6 rev1
- 3w6 rev2 (with Pimoroni support)
Hardware Availability:
- make one yourself: Design and Productionfiles
- maintainer is selling kits when available

To reach the bootloader, connect the board to the PC and push the reset button on left half.

Make examples for this keyboard (after setting up your build environment):

make 3w6/rev1:default
make 3w6/rev2:default
make 3w6/rev2:default_pimoroni

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.