History

Ryan a8d440e4e0 Tidy up NKRO_ENABLE rules (#15382 )		2021-12-09 16:05:44 +11:00
..
keymaps/default	Momoka Ergo: layout macro/Configurator fix (#13825 )	2021-07-31 12:16:51 -07:00
config.h	[Keyboard] Add Momoka ergo (#13127 )	2021-07-20 10:46:29 -07:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
momoka_ergo.c	[Keyboard] Add Momoka ergo (#13127 )	2021-07-20 10:46:29 -07:00
momoka_ergo.h	Momoka Ergo: layout macro/Configurator fix (#13825 )	2021-07-31 12:16:51 -07:00
readme.md	[Keyboard] Add Momoka ergo (#13127 )	2021-07-20 10:46:29 -07:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00

readme.md

momoka_ergo

The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.

Keyboard Maintainer: StefanGrindelwald
Hardware Supported: momoka.co/ergo
Hardware Availability: momoka.co/ergo

Bootloader:

With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.

Make example for this keyboard (after setting up your build environment):

make momoka_ergo:default

Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):

For the left side:

make momoka_ergo:default:dfu-split-left

For the right side:

make momoka_ergo:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.