109 lines
3 KiB
C
109 lines
3 KiB
C
/*
|
|
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/* Ensure we jump to bootloader if the RESET keycode was pressed */
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
|
|
/* LSE clock */
|
|
#define STM32_LSECLK 32768
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0xCA04
|
|
#define PRODUCT_ID 0x57F5
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER CannonKeys
|
|
#define PRODUCT Satisfaction75
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 6
|
|
#define MATRIX_COLS 16
|
|
|
|
#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 }
|
|
#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 }
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
#define ENCODERS_PAD_A { B9 }
|
|
#define ENCODERS_PAD_B { B8 }
|
|
|
|
#define ENCODER_RESOLUTION 2
|
|
|
|
//LEDS A6, RGB B15
|
|
#define BACKLIGHT_LEVELS 24
|
|
#define BACKLIGHT_BREATHING
|
|
#define BREATHING_PERIOD 6
|
|
|
|
/* define if matrix has ghost */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
// I2C config
|
|
#define I2C_DRIVER I2CD1
|
|
#define I2C1_SCL_PIN B6
|
|
#define I2C1_SDA_PIN B7
|
|
#define I2C1_SCL_PAL_MODE 1
|
|
#define I2C1_SDA_PAL_MODE 1
|
|
#define I2C1_TIMINGR_PRESC 0x00U
|
|
#define I2C1_TIMINGR_SCLDEL 0x03U
|
|
#define I2C1_TIMINGR_SDADEL 0x01U
|
|
#define I2C1_TIMINGR_SCLH 0x03U
|
|
#define I2C1_TIMINGR_SCLL 0x09U
|
|
|
|
/* Set 0 if debouncing isn't needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
// configure oled driver for the 128x32 oled
|
|
#define OLED_UPDATE_INTERVAL 66 // ~15fps
|
|
|
|
// OLED_TIMEOUT is incompatible with the OLED_OFF mode
|
|
#define OLED_TIMEOUT 0
|
|
|
|
// OLED timeout reimplemented in the keyboard-specific code
|
|
#define CUSTOM_OLED_TIMEOUT 60000
|
|
|
|
// Custom config starts after VIA's EEPROM usage,
|
|
// dynamic keymaps start after this.
|
|
// Custom config Usage:
|
|
// 1 for enabled encoder modes (1 byte)
|
|
// 1 for custom backlighting controls (1 byte)
|
|
// 1 for OLED default mode (1 byte)
|
|
// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
|
|
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 21
|
|
|
|
// VIA lighting is handled by the keyboard-level code
|
|
#define VIA_CUSTOM_LIGHTING_ENABLE
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|