mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/momoka_ergo
History
Ryan 5bd68e3695
Move single LAYOUTs to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
keymaps Fixup momoka_ergo (#18704) 2022-10-14 10:07:07 +11:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json Move single LAYOUTs to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md [Keyboard] Add Momoka ergo (#13127) 2021-07-20 10:46:29 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

momoka_ergo

momoka_ergo

The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.

  • Keyboard Maintainer: StefanGrindelwald
  • Hardware Supported: momoka.co/ergo
  • Hardware Availability: momoka.co/ergo

Bootloader:

With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.

Make example for this keyboard (after setting up your build environment):

make momoka_ergo:default

Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):

For the left side:

make momoka_ergo:default:dfu-split-left

For the right side:

make momoka_ergo:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.