mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/geekboards/macropad_v2
History
Ryan 522048725f
Move RGB_MATRIX_DRIVER to data driven (#20350)
2023-04-08 18:08:08 +10:00
..
keymaps VIA Protocol 12 + fixes (#19916) 2023-02-23 09:19:00 +11:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
macropad_v2.c Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.