mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/elrgo_s
History
Ryan 76cc7fe109
Move matrix config to info.json, part 6 (#20019)
2023-03-11 00:32:05 +11:00
..
keymaps/default Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
elrgo_s.c [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
elrgo_s.h [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
info.json Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Elrgo S Split Keyboard

This is a fork of the VOID Ergo S with QMK Configurator support.

Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.

Building guide, models for 3D printing

  • Keyboard Maintainer: Eloren
  • Hardware Supported: Arduino Pro Micro
  • Hardware Availability: Open Source

Make example for this keyboard (after setting up your build environment):

make handwired/elrgo_s:default

Flashing example for this keyboard:

make handwired/elrgo_s:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button through the hole on the left side of the case.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available