78 lines
2.5 KiB
Text
78 lines
2.5 KiB
Text
/** \file
|
|
*
|
|
* This file contains special DoxyGen information for the generation of the main page and other special
|
|
* documentation pages. It is not a project source file.
|
|
*/
|
|
|
|
/** \mainpage USB to Serial Converter Project
|
|
*
|
|
* \section Sec_Compat Project Compatibility:
|
|
*
|
|
* The following list indicates what microcontrollers are compatible with this project.
|
|
*
|
|
* \li Series 7 USB AVRs (AT90USBxxx7)
|
|
* \li Series 6 USB AVRs (AT90USBxxx6)
|
|
* \li Series 4 USB AVRs (ATMEGAxxU4)
|
|
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
|
|
*
|
|
* \section Sec_Info USB Information:
|
|
*
|
|
* The following table gives a rundown of the USB utilization of this project.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <td><b>USB Mode:</b></td>
|
|
* <td>Device</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Class:</b></td>
|
|
* <td>Communications Device Class (CDC)</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Subclass:</b></td>
|
|
* <td>Abstract Control Model (ACM)</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Relevant Standards:</b></td>
|
|
* <td>USBIF CDC Class Standard</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Supported USB Speeds:</b></td>
|
|
* <td>Full Speed Mode</td>
|
|
* </tr>
|
|
* </table>
|
|
*
|
|
* \section Sec_Description Project Description:
|
|
*
|
|
* USB to Serial bridge project. This project allows a USB AVR to serve
|
|
* as a USB to USART bridge between a USB host and a device lacking a
|
|
* USB port. When programmed into a USB AVR, the AVR will enumerate as a
|
|
* virtual COM port.
|
|
*
|
|
* The AVR's hardware USART's settings will change to mirror as closely as
|
|
* possible the serial settings set on the host. However, due to hardware
|
|
* limitations, some options may not be supported (baud rates with unacceptable
|
|
* error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
|
|
* 1.5 stop bits, parity other than none, even or odd).
|
|
*
|
|
* After running this project for the first time on a new computer,
|
|
* you will need to supply the .INF file located in this project
|
|
* project's directory as the device's driver when running under
|
|
* Windows. This will enable Windows to use its inbuilt CDC drivers,
|
|
* negating the need for custom drivers for the device. Other
|
|
* Operating Systems should automatically use their own inbuilt
|
|
* CDC-ACM drivers.
|
|
*
|
|
* \section Sec_Options Project Options
|
|
*
|
|
* The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <td>
|
|
* None
|
|
* </td>
|
|
* </tr>
|
|
* </table>
|
|
*/
|
|
|