mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/dztech/dz60rgb
History
Nick Brassel 87291437bd
Add board specific to Proton-C, with usual defaults turned on. (#10976) 
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-12-03 13:04:28 +11:00
..
keymaps Better handle LTO_ENABLE (#9832) 2020-08-29 14:30:02 -07:00
v1 Add board specific to Proton-C, with usual defaults turned on. (#10976) 2020-12-03 13:04:28 +11:00
v2 2020 November 28 Breaking Changes Update (#11053) 2020-11-28 12:02:18 -08:00
config.h Tidy up dztech config.h 2019-12-18 10:23:26 +11:00
dz60rgb.c Fix compilation warning for the DZ60RGB/DZ65RGB when RGB matrix is disabled (#9791) 2020-07-22 15:55:35 +10:00
dz60rgb.h Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00
info.json Tidy up dztech default keymaps and info.json (#7608) 2019-12-18 10:15:47 +11:00
readme.md Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00

readme.md

DZ60RGB

dz60rgb

A hotswap 60% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZtech DZ60RGB V1 and V2
  • Hardware Availability: KBDfans

There are two versions of the DZ60RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb/v1:default # Arm (STM32F303)
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.