History

x1 a461f607e7 [Keyboard] Add Kudox Full (#15256 ) * Add Kudox Full keyboard * Add keyboards/kudox_full SPDX identifier * Modify rule.mk of keyboards/kudox_full * Remove html code from README of keyboards/kudox_full * Modify readme of keyboards/kudox_full * rev1.c includes rev1.h - kudox-full/rev1 * Move to <keyboard>.c oled_task_user and eeconfig_init_user * Move post_config.h MOUSEKEY_* * Change BOOTMAGIC_ENABLE no kudox_full * Modify the obsoleted codes * Modify eeconfig_init_kb from eeconfig_init_user * Set none as default, but values * Add about the bootloader on kudox_full/readme * Modify the comments in keyboards/kudox_full/rules.mk		2022-01-08 13:23:34 -08:00
..
keymaps	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
rev1	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
config.h	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
kudox_full.c	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
kudox_full.h	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
post_config.h	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
readme.md	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00
rules.mk	[Keyboard] Add Kudox Full (#15256 )	2022-01-08 13:23:34 -08:00

The Kudox Full keyboard


front	angle

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to RESET if it is available

Make example for this keyboard (after setting up your build environment):

make kudox_full/rev1:default

Flashing example for this keyboard:

make kudox_full/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.