mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/rgbkb/sol3
History
Frank Tackitt 21603c5142
Enable mousekeys by default for RGBKB Sol3 (#17842)
2022-07-29 23:42:34 +01:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
rev1 Sol3 fix rgb map (#17019) 2022-05-07 01:01:16 +01:00
.noci [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
config.h Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 2022-02-26 03:20:57 +00:00
halconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
mcuconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
readme.md RGBKB Sol 3 rev1: Configurator Data and Readme (#16798) 2022-04-05 12:13:45 -07:00
rules.mk Enable mousekeys by default for RGBKB Sol3 (#17842) 2022-07-29 23:42:34 +01:00
sol3.c [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
sol3.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00

readme.md

Sol 3

Sol 3

An extensible split keyboard with hotswap sockets and per-key RGB lighting.

  • Keyboard Maintainer: XScorpion2, RGBKB
  • Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
  • Hardware Availability: RGBKB.net

Make example for this keyboard (after setting up your build environment):

make rgbkb/sol3/rev1:default

Flashing example for this keyboard:

make rgbkb/sol3/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

To reset the board into bootloader mode, do one of the following:

  • Keycode in layout: Press the key mapped to RESET if it is available (Adjust + R by default)
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)