History

Nick Brassel 416af0171c Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 ) * Remove CORTEX_ENABLE_WFI_IDLE from the codebase. * Turn on CORTEX_ENABLE_WFI_IDLE by default.		2023-06-23 20:31:25 +01:00
..
config.h	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
halconf.h	[Keyboard] 4pplet Perk60 (#16853 )	2022-07-23 13:23:14 -07:00
info.json	Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438 )	2023-04-15 21:09:08 +10:00
mcuconf.h	Migrate more F4x1 board files (#18046 )	2022-08-15 00:25:40 +01:00
readme.md	[Keyboard] 4pplet Perk60 (#16853 )	2022-07-23 13:23:14 -07:00
rev_a.c	Fix Per Key LED Indicator Callbacks (#18450 )	2022-10-04 15:24:22 -07:00
rev_a.h	Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438 )	2023-04-15 21:09:08 +10:00
rules.mk	Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 )	2023-06-23 20:31:25 +01:00

Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.