155375ea32
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL * add define USB_MAX_POWER_CONSUMPTION * Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk rules.mk: add 4 Variables for compile control. # Helix keyboard customize # you can edit follows 4 Variables # jp: 以下の4つの変数を必要に応じて編集します。 OLED_ENABLE = no # OLED_ENABLE LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = yes # LED animations config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define * HELIX_ROWS define move from config.h to rules.mk * add readme.md * rename readme.md to readme_jp.md * add readme.md and modify readme_jp.md * change helix/ssd1306.c for select glcdfont.c position * add variable LOCAL_GLCDFONT into each keymaps rules.mk * Add iPhone/iPad LED support to Helix default keymap * renumber _ADJUST for shrink program size * Fix Helix i2c wrong bit rate * add helix serial debug code * serial debug macro move from config.h to serial.h * helix serial.c debugging... * refine debug macros * add some comments * add SELECT_SERIAL_SPEED * add comments * debugging sync_send/sync_recv * add very high speed * fix sync_send/sync_recv * fix com. start and switch send/recv * debug mode off * remove debug codes * Shrinked config.h
123 lines
4.2 KiB
Makefile
123 lines
4.2 KiB
Makefile
|
|
# Build Options
|
|
# change to "no" to disable the options, or define them in the Makefile in
|
|
# the appropriate keymap folder that will get included automatically
|
|
#
|
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
MIDI_ENABLE = no # MIDI controls
|
|
AUDIO_ENABLE = no # Audio output on port C6
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
|
SWAP_HANDS_ENABLE = no # Enable one-hand typing
|
|
|
|
define HELIX_CUSTOMISE_MSG
|
|
$(info Helix customize)
|
|
$(info - OLED_ENABLE=$(OLED_ENABLE))
|
|
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
|
|
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
|
|
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
|
|
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
|
|
endef
|
|
|
|
# Helix keyboard customize
|
|
# you can edit follows 7 Variables
|
|
# jp: 以下の7つの変数を必要に応じて編集します。
|
|
HELIX_ROWS = 5 # Helix Rows is 4 or 5
|
|
OLED_ENABLE = no # OLED_ENABLE
|
|
LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
|
|
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
|
|
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
|
|
LED_ANIMATIONS = yes # LED animations
|
|
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
|
|
|
|
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
|
|
#### Do not enable these with audio at the same time.
|
|
|
|
### Helix keyboard 'five_rows' keymap: convenient command line option
|
|
## make HELIX=<options> helix:five_rows
|
|
## option= oled | back | under | na | ios
|
|
## ex.
|
|
## make HELIX=oled helix:five_rows
|
|
## make HELIX=oled,back helix:five_rows
|
|
## make HELIX=oled,under helix:five_rows
|
|
## make HELIX=oled,back,na helix:five_rows
|
|
## make HELIX=oled,back,ios helix:five_rows
|
|
##
|
|
ifneq ($(strip $(HELIX)),)
|
|
ifeq ($(findstring oled,$(HELIX)), oled)
|
|
OLED_ENABLE = yes
|
|
endif
|
|
ifeq ($(findstring back,$(HELIX)), back)
|
|
LED_BACK_ENABLE = yes
|
|
else ifeq ($(findstring under,$(HELIX)), under)
|
|
LED_UNDERGLOW_ENABLE = yes
|
|
endif
|
|
ifeq ($(findstring na,$(HELIX)), na)
|
|
LED_ANIMATIONS = no
|
|
endif
|
|
ifeq ($(findstring ios,$(HELIX)), ios)
|
|
IOS_DEVICE_ENABLE = yes
|
|
endif
|
|
$(eval $(call HELIX_CUSTOMISE_MSG))
|
|
$(info )
|
|
endif
|
|
|
|
# Uncomment these for checking
|
|
# jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。
|
|
# $(eval $(call HELIX_CUSTOMISE_MSG))
|
|
# $(info )
|
|
|
|
ifneq ($(strip $(HELIX_ROWS)), 4)
|
|
ifneq ($(strip $(HELIX_ROWS)), 5)
|
|
$(error HELIX_ROWS = $(strip $(HELIX_ROWS)) is unexpected value)
|
|
endif
|
|
endif
|
|
OPT_DEFS += -DHELIX_ROWS=$(strip $(HELIX_ROWS))
|
|
|
|
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
|
|
RGBLIGHT_ENABLE = yes
|
|
OPT_DEFS += -DRGBLED_BACK
|
|
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
|
|
$(eval $(call HELIX_CUSTOMISE_MSG))
|
|
$(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
|
|
endif
|
|
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
|
|
RGBLIGHT_ENABLE = yes
|
|
else
|
|
RGBLIGHT_ENABLE = no
|
|
endif
|
|
|
|
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
|
|
OPT_DEFS += -DIOS_DEVICE_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(LED_ANIMATIONS)), yes)
|
|
OPT_DEFS += -DRGBLIGHT_ANIMATIONS
|
|
endif
|
|
|
|
ifeq ($(strip $(OLED_ENABLE)), yes)
|
|
OPT_DEFS += -DOLED_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
|
|
OPT_DEFS += -DLOCAL_GLCDFONT
|
|
endif
|
|
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
|
|
ifndef QUANTUM_DIR
|
|
include ../../../../Makefile
|
|
endif
|
|
|
|
# Uncomment these for debugging
|
|
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
|
|
# $(info -- OPT_DEFS=$(OPT_DEFS))
|
|
# $(info )
|