mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/hineybush/h65_hotswap
History
Ryan 7bfc2a367d
Move 65% layouts to data driven (#20308)
2023-04-04 15:20:10 +10:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
config.h Remove RGB_DI_PIN ifdefs (#20218) 2023-03-23 21:38:01 +11:00
info.json Move 65% layouts to data driven (#20308) 2023-04-04 15:20:10 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

h65 hotswap

h65 hotswap

A 65%, hotswap, USB 2.0 Type C PCB.

  • Keyboard Maintainer: hineybush
  • Hardware Supported: h65hs, Singa Kohaku
  • Hardware Availability: Singa Kohaku Group Buy

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

make hineybush/h65:default

Flashing example for this keyboard:

make hineybush/h65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.