4b453dca92
* remove keyboard-level instances of `MIDI_ENABLE = no`
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* fix case-sensitivity issues on MIDI_ENABLE
Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```
* replace `# MIDI controls` with `# MIDI support`
Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```
* align inline comments
Aligns the inline comments to the length used by the QMK AVR rules.mk template.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} +
```
* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```
* remove MIDI configuration boilerplate from keyboard config.h files
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| chconf.h | ||
| config.h | ||
| info.json | ||
| keebspcb.c | ||
| keebspcb.h | ||
| mcuconf.h | ||
| readme.md | ||
| rules.mk | ||
Acheron Aχξρων 60-SM-S-STM32-MX-HS-WI (codename "KeebsPCB") QMK firmware
Introduction
This is the QMK firmware repository for the KeebsPCB, updated until pre-revision Alpha.
The KeebsPCB is an Open-Hardware guidelines compliant PCB which files can be found at this link. Its designer and maintainer is Gondolindrim.
The KeebsPCB is a collaboration between Gondolindrim and MrKeebs; its layouts and features were cherry-picked by MrKeebs and the PCB was designed for him with these chosen features.
As of may 2020, there is no way to buy an KeebsPCB through a vendor or Group Buy; the only possible way is ordering them directly from a manufacturer.
Layouts
The PCB offers a single layout consisting of a default ANSI layout with 7U bottom row.
PCB Documentation
See the AcheronDocs page for the KeebsPCB full documentation. You can also check the KiCad PCB files at the KeebsPCB GitHub repository.
Before using the files for personal or commercial use, please read the Acheron Open-Hardware License V1.2 under which the Austin PCB is published.
How to compile
After setting up your build environment, you can compile the KeebsPCB default keymap by using:
make acheron/keebspcb:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.