mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/studiokestra/nue
History
Ryan a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382)
2021-12-09 16:05:44 +11:00
..
keymaps [Keyboard] Add Studio Kestra Nue PCB (#12094) 2021-03-03 17:02:27 -08:00
config.h [Keyboard] Add Studio Kestra Nue PCB (#12094) 2021-03-03 17:02:27 -08:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
nue.c [Keyboard] Add Studio Kestra Nue PCB (#12094) 2021-03-03 17:02:27 -08:00
nue.h [Keyboard] Add Studio Kestra Nue PCB (#12094) 2021-03-03 17:02:27 -08:00
readme.md [Keyboard] Add Studio Kestra Nue PCB (#12094) 2021-03-03 17:02:27 -08:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Nue

60% PCB with gasket mounting tabs designed for the Nue keyboard.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the R key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/nue:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.