mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/onekeyco/dango40
History
James Young e41893b557
One Key Co Dango40 Touch-Up and Layout Addition (#20755) 
* add matrix_diagram.md

* info.json: apply friendly formatting

* remove matrix position K3B

Based on photos of the keyboard and renders of the PCB, I'm not convinced it exists.

* add LAYOUT_625u_space
2023-05-06 20:25:44 -07:00
..
keymaps One Key Co Dango40 Touch-Up and Layout Addition (#20755) 2023-05-06 20:25:44 -07:00
config.h Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
info.json One Key Co Dango40 Touch-Up and Layout Addition (#20755) 2023-05-06 20:25:44 -07:00
matrix_diagram.md One Key Co Dango40 Touch-Up and Layout Addition (#20755) 2023-05-06 20:25:44 -07:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Dango40

40% keyboard

  • Keyboard Maintainer: Swiftrax
  • Hardware Supported: Dango40
  • Hardware Availability: Dango40 PCB

Bootloader Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for flashing this keyboard (after setting up your build environment):

make onekeyco/dango40:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.