mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/elrgo_s
History
Ryan a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382)
2021-12-09 16:05:44 +11:00
..
keymaps/default [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
config.h [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
elrgo_s.c [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
elrgo_s.h [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Elrgo S Split Keyboard

This is a fork of the VOID Ergo S with QMK Configurator support.

Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.

Building guide, models for 3D printing

  • Keyboard Maintainer: Eloren
  • Hardware Supported: Arduino Pro Micro
  • Hardware Availability: Open Source

Make example for this keyboard (after setting up your build environment):

make handwired/elrgo_s:default

Flashing example for this keyboard:

make handwired/elrgo_s:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button through the hole on the left side of the case.
  • Keycode in layout: Press the key mapped to RESET if it is available