History

Ryan 56555c61e1 Migrate `LAYOUTS` to data driven (#19541 ) * Migrate `LAYOUTS` to data driven, 0-9 * Migrate `LAYOUTS` to data driven, A * Migrate `LAYOUTS` to data driven, B * Migrate `LAYOUTS` to data driven, C * Migrate `LAYOUTS` to data driven, D * Migrate `LAYOUTS` to data driven, E * Migrate `LAYOUTS` to data driven, F * Migrate `LAYOUTS` to data driven, G * Migrate `LAYOUTS` to data driven, H * Migrate `LAYOUTS` to data driven, handwired * Migrate `LAYOUTS` to data driven, I * Migrate `LAYOUTS` to data driven, J * Migrate `LAYOUTS` to data driven, K * Migrate `LAYOUTS` to data driven, L * Migrate `LAYOUTS` to data driven, M * Migrate `LAYOUTS` to data driven, N * Migrate `LAYOUTS` to data driven, O * Migrate `LAYOUTS` to data driven, P * Migrate `LAYOUTS` to data driven, Q * Migrate `LAYOUTS` to data driven, R * Migrate `LAYOUTS` to data driven, S * Migrate `LAYOUTS` to data driven, T * Migrate `LAYOUTS` to data driven, U * Migrate `LAYOUTS` to data driven, V * Migrate `LAYOUTS` to data driven, W * Migrate `LAYOUTS` to data driven, X * Migrate `LAYOUTS` to data driven, Y * Migrate `LAYOUTS` to data driven, Z		2023-01-10 02:48:20 +00:00
..
keymaps	[Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007 )	2022-12-12 16:52:22 +01:00
bm80hsrgb.c	rename kprepublic bm keyboards to have a standardized naming format (#15047 )	2021-11-18 08:37:23 +11:00
bm80hsrgb.h	rename kprepublic bm keyboards to have a standardized naming format (#15047 )	2021-11-18 08:37:23 +11:00
config.h	Change `RGB_MATRIX_STARTUP_` defines to `RGB_MATRIX_DEFAULT_` (#19079 )	2022-11-27 04:18:24 +11:00
info.json	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
readme.md	rename kprepublic bm keyboards to have a standardized naming format (#15047 )	2021-11-18 08:37:23 +11:00
rules.mk	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00

readme.md

BM80HSRGB

A tkl, hotswap, in switch RGB keyboard from KPRepublic.

Keyboard Maintainer: peepeetee
Hardware Supported: BM80HSRGB
Hardware Availability: KP Republic

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm80hsrgb:default

Flashing example for this keyboard:

make kprepublic/bm80hsrgb:default:flash

To reset the board into bootloader mode, do one of the following:

Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
Hold the Esc key while connecting the USB cable (also erases persistent settings)

All of the RGB matrix effects are enabled by default. To disable specific ones, see this section for more information.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.