History

Ryan 7e0299117b Move encoder config to data driven (#19923 ) Co-authored-by: Nick Brassel <nick@tzarc.org>		2023-02-26 09:45:12 +11:00
..
keymaps
config.h	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
info.json	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
tidbit.c	Remove legacy keycodes, part 5 (#18710 )	2022-10-15 22:29:43 +01:00
tidbit.h

readme.md

TIDBIT

A very moddable 19-key numpad kit built by nullbits. More info at nullbits.co

Keyboard Maintainer: Jay Greco
Hardware Supported: TIDBIT Rev1, Pro Micro comaptible MCUs.
Hardware Availability: nullbits.co

Note: If you are seeing issues with MacOS and keyboard hangs after sleep, make sure NO_USB_STARTUP_CHECK = yes is set in your rules.mk.

Adds experimental "Remote Keyboard" functionality, which forwards keystrokes from an external macropad, keyboard, or numpad over UART/TRRS, removing the need for an additional USB connection.

Bootloader

Enter the bootloader in 2 ways:

Physical reset button: Briefly press the button on the back of the PCB
Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

make nullbitsco/tidbit:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.