qmk_sweep_skeletyl/keyboards/acheron/shark

SharkPCB QMK firmware

The SharkPCB is an open-source ortholinear 40% layout designed by Gondolindrim for the AcheronProject.

• Keyboard Maintainer: Gondolindrim
• Hardware Availability: you can get release Beta SharkPCBs using the JLCPCB manufacturer using the files at its documentation

How to flash

Enter bootloader

Release Alpha:

The DFU state in the bootloader can be accessed in 2 ways:

• Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: press the button on the back of the PCB
• Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Release Beta:

The DFU state in the bootloader can be accessed in 3 ways:

• Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: press the button on the back of the PCB, for at least five seconds
• Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

Release Alpha

After accessing the DFU state in your PCB, build the default layout using:

make acheron/shark/alpha:default

Release Beta

After accessing the DFU state in your PCB, build the default layout using:

make acheron/shark/beta:default

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.