mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/4pplet/waffling60/rev_d
History
Ryan 1184e0d9be
Adjust keycode alignment around QK_BOOT (#23697)
2024-05-11 16:50:48 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
config.h Move RGBLIGHT_HUE/SAT/VAL_STEP to data driven (#21292) 2023-06-24 17:37:54 +10:00
keyboard.json Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00
readme.md [Keyboard] Add Waffling60 revision e (#21664) 2023-10-26 23:42:11 -07:00
rev_d.c [Keyboard] Add waffling60 Rev D Solder (#18580) 2022-10-05 10:30:03 -07:00
rev_d.h Move single LAYOUTs to data driven (#20365) 2023-04-12 13:42:51 +10:00
rules.mk Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00

readme.md

waffling60

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.

More info: https://geekhack.org/index.php?topic=103531.0

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_d:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.