mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/elrgo_s
History
Dasky dc4af81e0b
Remove legacy USE_SERIAL define (#18292) 
* Remove legacy USE_SERIAL define

* tidy up missed comments
2022-09-06 18:46:34 +01:00
..
keymaps/default Remove legacy USE_SERIAL define (#18292) 2022-09-06 18:46:34 +01:00
config.h Move keyboard USB IDs and strings to data driven: handwired (#17822) 2022-07-30 17:31:44 +10:00
elrgo_s.c [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
elrgo_s.h [Keyboard] Add Elrgo S to keyboards/handwired (#13893) 2021-08-19 11:15:30 -07:00
info.json Move keyboard USB IDs and strings to data driven: handwired (#17822) 2022-07-30 17:31:44 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Elrgo S Split Keyboard

This is a fork of the VOID Ergo S with QMK Configurator support.

Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.

Building guide, models for 3D printing

  • Keyboard Maintainer: Eloren
  • Hardware Supported: Arduino Pro Micro
  • Hardware Availability: Open Source

Make example for this keyboard (after setting up your build environment):

make handwired/elrgo_s:default

Flashing example for this keyboard:

make handwired/elrgo_s:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button through the hole on the left side of the case.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available