mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/1k
History
Joel Challis 6b60089fc7
Migrate build target markers to keyboard.json - 0AB (#23488)
2024-04-12 23:34:44 +01:00
..
keymaps/default Add init function to RGBLight driver struct (#23076) 2024-03-18 22:03:27 +11:00
config.h
keyboard.json Migrate build target markers to keyboard.json - 0AB (#23488) 2024-04-12 23:34:44 +01:00
readme.md
rules.mk Migrate build target markers to keyboard.json - 0AB (#23488) 2024-04-12 23:34:44 +01:00

readme.md

1k

1k

1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

Make example for this keyboard (after setting up your build environment):

make 1k:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

make 1k:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery