mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/mode/eighty/m80h
History
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps Mode80 support (#10945) 2020-12-30 01:27:33 +00:00
config.h Change PRODUCT_ID descriptors for M80S and M80H (#11371) 2020-12-31 12:58:59 +00:00
info.json Mode80 support (#10945) 2020-12-30 01:27:33 +00:00
m80h.c Mode80 support (#10945) 2020-12-30 01:27:33 +00:00
m80h.h Mode80 support (#10945) 2020-12-30 01:27:33 +00:00
readme.md Mode80 support (#10945) 2020-12-30 01:27:33 +00:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Mode Eighty M80H (hotswap version)

This is the folder page for the QMK-supported firmware of the M80H, the hotswap PCB for the Mode 80.

Make example for this keyboard (after setting up your build environment):

make mode/eighty/m80h:default

Flashing example for this keyboard:

make mode/eighty/m80h:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.