History

James Young 4b453dca92 Remove MIDI Configuration boilerplate (#11151 ) * remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]MIDI_ENABLE[ \t]=[ \t]no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE[ \t]=[ \t][Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]MIDI[ \t]\(controls\\|support\).;# MIDI support;g' {} + ``` align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE = yes.;MIDI_ENABLE = yes # MIDI support;g' {} + ``` remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#\([ \t]MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;^\([ \t]\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]\+MIDI_ENABLE = no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org>		2021-08-16 06:51:13 +10:00
..
keymaps/default	[Keyboard] Orion Locking Indicator LED Support (#7683 )	2019-12-29 11:16:24 -08:00
config.h	Remove `DESCRIPTION`, B-D (#11513 )	2021-01-15 05:00:04 +11:00
indicator_leds.c	[Keyboard] Preliminary Support for Duck Orion V3 (#6892 )	2019-10-04 22:06:57 -07:00
indicator_leds.h	[Keyboard] Preliminary Support for Duck Orion V3 (#6892 )	2019-10-04 22:06:57 -07:00
matrix.c	Remove backlight_init_ports from duck/orion/v3 (#7878 )	2020-01-13 03:49:01 +00:00
readme.md	[Keyboard] Orion Locking Indicator LED Support (#7683 )	2019-12-29 11:16:24 -08:00
rules.mk	Remove MIDI Configuration boilerplate (#11151 )	2021-08-16 06:51:13 +10:00
v3.c	[Keyboard] Orion Locking Indicator LED Support (#7683 )	2019-12-29 11:16:24 -08:00
v3.h	[Keyboard] Preliminary Support for Duck Orion V3 (#6892 )	2019-10-04 22:06:57 -07:00

readme.md

Duck Orion V3

Non official firmware for custom TKL Korean keyboard made by Duck.
Group buy was run December 2018 via geekhack with 100 keyboards total.

Keyboard Maintainer: MechMerlin
Hardware Supported: Duck Orion V3 PCB Ver 2.1
Hardware Availability: Wait until GB of the next revision

Make example for this keyboard (after setting up your build environment):

make duck/orion/v3:default

Reset Key: To put the Orion V3 into reset, hold Backspace key (K4N) while plugging in.

CAUTION: At this time 12/19/19 layer indicator lighting has not been implemented by default.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Hardware Notes

The Orion V3 PCB consists of:

Microchips

2 74HC237D 3-to-8 line decoders U1, U2 1 Atmega32u4 microcontroller 2 WS2811 LED controller U5, U6

Notes

Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix, indicator LEDs, and backlight LEDs.