qmk_sweep_skeletyl/keyboards/stenokeyboards/the_uni/rp_2040
2023-02-08 18:41:46 +11:00
..
config.h Remove unused LOCKING_SUPPORT_ENABLE from config.h (#19748) 2023-02-05 20:26:45 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md [Keyboard] The Uni change folder location (#19326) 2022-12-17 19:26:02 -08:00
rp_2040.c [Keyboard] The Uni change folder location (#19326) 2022-12-17 19:26:02 -08:00
rp_2040.h [Keyboard] The Uni change folder location (#19326) 2022-12-17 19:26:02 -08:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Uni v4

Uni v4

Make the .uf2 file by doing:

Bootloader

Enter the bootloader by:

  • Physical boot button:
    • First, unplug the Uni v4.
    • Then press and hold the button on the back of the PCB marked "B" while you plug in the keyboard. This will create register the keyboard as a storage device on the computer.
    • Copy and paste the .uf2 file in the top directory of the device. Once done, it will automatically reboot the keyboard.

Make examples for this keyboard (after setting up your build environment):

qmk compile -kb stenokeyboards/the_uni/rp_2040 -km default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.