History

Ryan b727434391 Remove commented out backlight config & stray "backlight levels" (#19703 )		2023-01-28 15:42:44 +00:00
..
keymaps	Remove legacy keycodes, part 5 (#18710 )	2022-10-15 22:29:43 +01:00
5x5.c	Remove empty override functions (#14312 )	2021-09-05 21:36:31 +01:00
5x5.h	Tidy 40percentclub boards (#4403 )	2018-11-12 12:02:28 -08:00
config.h	Remove commented out backlight config & stray "backlight levels" (#19703 )	2023-01-28 15:42:44 +00:00
info.json	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
readme.md	relocate 40percent.club boards to new parent folder (#4380 )	2018-11-08 15:17:41 -08:00
rules.mk	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00

readme.md

5x5

Modular Keypad/Keyboard
The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side.
5x5, 5x10, and 5x15 matrices are possible.
There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.
All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro).

The original TMK firmware

Keyboard Maintainer: QMK Community
Hardware Supported: 5x5 PCB
Hardware Availability: 5x5 project on 40% Keyboards

Make example for this keyboard (after setting up your build environment):

make 40percentclub/5x5:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.