88 lines
No EOL
2.8 KiB
C
88 lines
No EOL
2.8 KiB
C
/* Copyright 2023 ebastler and elpekenin
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "matrix.h"
|
|
#include "pca9555.h"
|
|
#include "timer.h"
|
|
|
|
// PCA9555 i2c address, 0x20: A0 = 0, A1 = 0, A2 = 0
|
|
#define IC1 0x20
|
|
|
|
// Define how long to wait to reach the IO expander after connection loss again
|
|
// Since this board is modular, it should not spam unnecessary i2c requests if used without a module
|
|
#define RETRY_TIMESPAN 2000
|
|
|
|
typedef enum {
|
|
PLUGGED,
|
|
DOUBTFUL,
|
|
UNPLUGGED
|
|
} expander_status_t;
|
|
|
|
void pca9555_setup(void) {
|
|
// Initialize the expander, no need to set ports to inputs as that is the default behavior
|
|
pca9555_init(IC1);
|
|
}
|
|
|
|
void matrix_init_custom(void) {
|
|
// Encoder pushbutton on the MCU is connected to PD2
|
|
gpio_set_pin_input_high(D2);
|
|
pca9555_setup();
|
|
}
|
|
|
|
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
|
static expander_status_t status = DOUBTFUL;
|
|
static uint32_t retry_timer = 0;
|
|
|
|
// initialize one byte filled with 1
|
|
uint8_t pin_states = 0xFF;
|
|
|
|
|
|
if (status != UNPLUGGED || timer_elapsed32(retry_timer) > RETRY_TIMESPAN) {
|
|
// If the chip was unplugged before, it needs to be re-initialized
|
|
if(status==UNPLUGGED) {
|
|
pca9555_setup();
|
|
}
|
|
// Read the entire port into this byte, 1 = not pressed, 0 = pressed
|
|
bool ret = pca9555_read_pins(IC1, PCA9555_PORT0, &pin_states);
|
|
|
|
// Update state
|
|
if (ret) {
|
|
status = PLUGGED;
|
|
} else {
|
|
switch (status) {
|
|
case PLUGGED:
|
|
status = DOUBTFUL;
|
|
break;
|
|
|
|
case DOUBTFUL:
|
|
status = UNPLUGGED;
|
|
break;
|
|
|
|
// If we've diagnosed as unplugged, update timer to not read I2C
|
|
case UNPLUGGED:
|
|
retry_timer = timer_read32();
|
|
}
|
|
}
|
|
}
|
|
|
|
// Shift pin states by 1 to make room for the switch connected to the MCU, then OR them together and invert (as QMK uses inverted logic compared to the electrical levels)
|
|
matrix_row_t data = ~(pin_states << 1 | gpio_read_pin(D2));
|
|
|
|
bool changed = current_matrix[0] != data;
|
|
current_matrix[0] = data;
|
|
|
|
return changed;
|
|
} |