mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/mode/m80v2
History
James Young 495e83b30f
Migrate LOCKING_*_ENABLE to Data-Driven: M, Part 2 (#23773) 
Affects:

  - `mkh_studio/bully`
  - `mlego/m48/rev1`
  - `mlego/m60/rev1`
  - `mlego/m60_split/rev1`
  - `mlego/m60_split/rev2`
  - `mntre`
  - `mode/m65ha_alpha`
  - `mode/m65hi_alpha`
  - `mode/m65s`
  - `mode/m80v1/m80h`
  - `mode/m80v1/m80s`
  - `mode/m80v2/m80v2h`
  - `mode/m80v2/m80v2s`
  - `molecule`
  - `momoka_ergo`
  - `monarch`
  - `monsgeek/m1`
  - `monsgeek/m3`
  - `monsgeek/m5`
  - `monsgeek/m6`
  - `monstargear/xo87/rgb`
  - `monstargear/xo87/solderable`
  - `montsinger/rebound/rev1`
  - `montsinger/rebound/rev2`
  - `montsinger/rebound/rev3`
  - `montsinger/rebound/rev4`
  - `montsinger/rewind`
  - `moon`
  - `morizon`
  - `mountainblocks/mb17`
  - `mt/blocked65`
  - `mt/mt64rgb`
  - `mt/mt980`
  - `mtbkeys/mtb60/hotswap`
  - `mtbkeys/mtb60/solder`
  - `murcielago/rev1`
  - `mxss`
  - `mysticworks/wyvern`
2024-05-22 11:13:39 +01:00
..
m80v2h Migrate LOCKING_*_ENABLE to Data-Driven: M, Part 2 (#23773) 2024-05-22 11:13:39 +01:00
m80v2s Migrate LOCKING_*_ENABLE to Data-Driven: M, Part 2 (#23773) 2024-05-22 11:13:39 +01:00
chconf.h
halconf.h
mcuconf.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

Mode Eighty V2 PCB QMK firmware

MODE80
Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F072 controller
  • Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v2/m80v2h:default # Hotswap
make mode/m80v2/m80v2s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v2/m80v2h:default:flash # Hotswap
make mode/m80v2/m80v2s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.