98 lines
3.1 KiB
C
98 lines
3.1 KiB
C
/*
|
|
Copyright 2022 Yiancar-Designs
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published byß
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 5
|
|
#define MATRIX_COLS 15
|
|
|
|
#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 }
|
|
#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15 }
|
|
|
|
/* COL2ROW, ROW2COL*/
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
|
|
/* Indicator LEDs */
|
|
#define LED_CAPS_LOCK_PIN B6
|
|
#define LED_PIN_ON_STATE 0
|
|
|
|
/* RGB Light */
|
|
#define WS2812_PWM_DRIVER PWMD1
|
|
#define WS2812_PWM_CHANNEL 2
|
|
#define WS2812_PWM_PAL_MODE 2
|
|
#define WS2812_DMA_STREAM STM32_DMA1_STREAM5
|
|
#define WS2812_DMA_CHANNEL 5
|
|
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
|
|
|
|
#define RGB_DI_PIN A9
|
|
#define RGBLED_NUM 37
|
|
#define RGBLIGHT_HUE_STEP 8
|
|
#define RGBLIGHT_SAT_STEP 8
|
|
#define RGBLIGHT_VAL_STEP 8
|
|
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
#define RGBLIGHT_EFFECT_SNAKE
|
|
#define RGBLIGHT_EFFECT_KNIGHT
|
|
#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
#define RGBLIGHT_EFFECT_RGB_TEST
|
|
#define RGBLIGHT_EFFECT_ALTERNATING
|
|
#define RGBLIGHT_EFFECT_TWINKLE
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
#define BOOTMAGIC_LITE_ROW 0
|
|
#define BOOTMAGIC_LITE_COLUMN 0
|