qmk_sweep_skeletyl/quantum/audio/audio.h

/* Copyright 2016-2020 Jack Humbert
 * Copyright 2020 JohSchneider
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#pragma once

#include <stdint.h>
#include <stdbool.h>
#include "musical_notes.h"
#include "song_list.h"
#include "voices.h"

#if defined(AUDIO_DRIVER_PWM)
#    include "audio_pwm.h"
#elif defined(AUDIO_DRIVER_DAC)
#    include "audio_dac.h"
#endif

typedef union {
    uint8_t raw;
    struct {
        bool    enable : 1;
        bool    clicky_enable : 1;
        bool    valid : 1;
        uint8_t reserved : 5;
    };
} audio_config_t;

_Static_assert(sizeof(audio_config_t) == sizeof(uint8_t), "Audio EECONFIG out of spec.");

/*
 * a 'musical note' is represented by pitch and duration; a 'musical tone' adds intensity and timbre
 * https://en.wikipedia.org/wiki/Musical_tone
 * "A musical tone is characterized by its duration, pitch, intensity (or loudness), and timbre (or quality)"
 */
typedef struct {
    uint16_t time_started; // timestamp the tone/note was started, system time runs with 1ms resolution -> 16bit timer overflows every ~64 seconds, long enough under normal circumstances; but might be too soon for long-duration notes when the note_tempo is set to a very low value
    float    pitch;        // aka frequency, in Hz
    uint16_t duration;     // in ms, converted from the musical_notes.h unit which has 64parts to a beat, factoring in the current tempo in beats-per-minute
    // float intensity;    // aka volume [0,1] TODO: not used at the moment; pwm drivers can't handle it
    // uint8_t timbre;     // range: [0,100] TODO: this currently kept track of globally, should we do this per tone instead?
} musical_tone_t;

// public interface

/**
 * @brief Save the current choices to the eeprom
 */
void eeconfig_update_audio_current(void);

/**
 * @brief one-time initialization called by quantum/quantum.c
 * @details usually done lazy, when some tones are to be played
 *
 * @post audio system (and hardware) initialized and ready to play tones
 */
void audio_init(void);
void audio_startup(void);

/**
 * @brief en-/disable audio output, save this choice to the eeprom
 */
void audio_toggle(void);
/**
 * @brief enable audio output, save this choice to the eeprom
 */
void audio_on(void);
/**
 * @brief disable audio output, save this choice to the eeprom
 */
void audio_off(void);
/**
 * @brief query the if audio output is enabled
 */
bool audio_is_on(void);

/**
 * @brief start playback of a tone with the given frequency and duration
 *
 * @details starts the playback of a given note, which is automatically stopped
 *          at the the end of its duration = fire&forget
 *
 * @param[in] pitch frequency of the tone be played
 * @param[in] duration in milliseconds, use 'audio_duration_to_ms' to convert
 *                     from the musical_notes.h unit to ms
 */
void audio_play_note(float pitch, uint16_t duration);
// TODO: audio_play_note(float pitch, uint16_t duration, float intensity, float timbre);
// audio_play_note_with_instrument ifdef AUDIO_ENABLE_VOICES

/**
 * @brief start playback of a tone with the given frequency
 *
 * @details the 'frequency' is put on-top the internal stack of active tones,
 *          as a new tone with indefinite duration. this tone is played by
 *          the hardware until a call to 'audio_stop_tone'.
 *          should a tone with that frequency already be active, its entry
 *          is put on the top of said internal stack - so no duplicate
 *          entries are kept.
 *          'hardware_start' is called upon the first note.
 *
 * @param[in] pitch frequency of the tone be played
 */
void audio_play_tone(float pitch);

/**
 * @brief stop a given tone/frequency
 *
 * @details removes a tone matching the given frequency from the internal
 *          playback stack
 *          the hardware is stopped in case this was the last/only frequency
 *          being played.
 *
 * @param[in] pitch tone/frequency to be stopped
 */
void audio_stop_tone(float pitch);

/**
 * @brief play a melody
 *
 * @details starts playback of a melody passed in from a SONG definition - an
 *          array of {pitch, duration} float-tuples
 *
 * @param[in] np note-pointer to the SONG array
 * @param[in] n_count number of MUSICAL_NOTES of the SONG
 * @param[in] n_repeat false for onetime, true for looped playback
 */
void audio_play_melody(float (*np)[][2], uint16_t n_count, bool n_repeat);

/**
 * @brief play a short tone of a specific frequency to emulate a 'click'
 *
 * @details constructs a two-note melody (one pause plus a note) and plays it through
 *          audio_play_melody. very short durations might not quite work due to
 *          hardware limitations (DAC: added pulses from zero-crossing feature;...)
 *
 * @param[in] delay in milliseconds, length for the pause before the pulses, can be zero
 * @param[in] pitch
 * @param[in] duration in milliseconds, length of the 'click'
 */
void audio_play_click(uint16_t delay, float pitch, uint16_t duration);

/**
 * @brief stops all playback
 *
 * @details stops playback of both a melody as well as single tones, resetting
 *          the internal state
 */
void audio_stop_all(void);

/**
 * @brief query if one/multiple tones are playing
 */
bool audio_is_playing_note(void);

/**
 * @brief query if a melody/SONG is playing
 */
bool audio_is_playing_melody(void);

// These macros are used to allow audio_play_melody to play an array of indeterminate
// length. This works around the limitation of C's sizeof operation on pointers.
// The global float array for the song must be used here.
#define NOTE_ARRAY_SIZE(x) ((int16_t)(sizeof(x) / (sizeof(x[0]))))

/**
 * @brief convenience macro, to play a melody/SONG once
 */
#define PLAY_SONG(note_array) audio_play_melody(&note_array, NOTE_ARRAY_SIZE((note_array)), false)
// TODO: a 'song' is a melody plus singing/vocals -> PLAY_MELODY
/**
 * @brief convenience macro, to play a melody/SONG in a loop, until stopped by 'audio_stop_all'
 */
#define PLAY_LOOP(note_array) audio_play_melody(&note_array, NOTE_ARRAY_SIZE((note_array)), true)

// Tone-Multiplexing functions
// this feature only makes sense for hardware setups which can't do proper
// audio-wave synthesis = have no DAC and need to use PWM for tone generation
#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING
#    ifndef AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT
#        define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 0
//       0=off, good starting value is 4; the lower the value the higher the cpu-load
#    endif
void audio_set_tone_multiplexing_rate(uint16_t rate);
void audio_enable_tone_multiplexing(void);
void audio_disable_tone_multiplexing(void);
void audio_increase_tone_multiplexing_rate(uint16_t change);
void audio_decrease_tone_multiplexing_rate(uint16_t change);
#endif

// Tempo functions

void audio_set_tempo(uint8_t tempo);
void audio_increase_tempo(uint8_t tempo_change);
void audio_decrease_tempo(uint8_t tempo_change);

// conversion macros, from 64parts-to-a-beat to milliseconds and back
uint16_t audio_duration_to_ms(uint16_t duration_bpm);
uint16_t audio_ms_to_duration(uint16_t duration_ms);

void audio_startup(void);

// hardware interface

// implementation in the driver_avr/arm_* respective parts
void audio_driver_initialize(void);
void audio_driver_start(void);
void audio_driver_stop(void);

/**
 * @brief get the number of currently active tones
 * @return number, 0=none active
 */
uint8_t audio_get_number_of_active_tones(void);

/**
 * @brief access to the raw/unprocessed frequency for a specific tone
 * @details each active tone has a frequency associated with it, which
 *          the internal state keeps track of, and is usually influenced
 *          by various effects
 * @param[in] tone_index, ranging from 0 to number_of_active_tones-1, with the
 *            first being the most recent and each increment yielding the next
 *            older one
 * @return a positive frequency, in Hz; or zero if the tone is a pause
 */
float audio_get_frequency(uint8_t tone_index);

/**
 * @brief calculate and return the frequency for the requested tone
 * @details effects like glissando, vibrato, ... are post-processed onto the
 *          each active tones 'base'-frequency; this function returns the
 *          post-processed result.
 * @param[in] tone_index, ranging from 0 to number_of_active_tones-1, with the
 *            first being the most recent and each increment yielding the next
 *            older one
 * @return a positive frequency, in Hz; or zero if the tone is a pause
 */
float audio_get_processed_frequency(uint8_t tone_index);

/**
 * @brief   update audio internal state: currently playing and active tones,...
 * @details This function is intended to be called by the audio-hardware
 *          specific implementation on a somewhat regular basis while a SONG
 *          or notes (pitch+duration) are playing to 'advance' the internal
 *          state (current playing notes, position in the melody, ...)
 *
 * @return true if something changed in the currently active tones, which the
 *         hardware might need to react to
 */
bool audio_update_state(void);

// legacy and back-warts compatibility stuff

#define is_audio_on() audio_is_on()
#define is_playing_notes() audio_is_playing_melody()
#define is_playing_note() audio_is_playing_note()
#define stop_all_notes() audio_stop_all()
#define stop_note(f) audio_stop_tone(f)
#define play_note(f, v) audio_play_tone(f)

#define set_timbre(t) voice_set_timbre(t)
#define set_tempo(t) audio_set_tempo(t)
#define increase_tempo(t) audio_increase_tempo(t)
#define decrease_tempo(t) audio_decrease_tempo(t)
// vibrato functions are not used in any keyboards

void audio_on_user(void);
void audio_off_user(void);