|
…
|
||
|---|---|---|
| .. | ||
| config.h | ||
| readme.md | ||
| rules.mk | ||
Pro Micro splittest
To trigger keypress, short together pins B3 and B6 (marked on the PCB as 14 and 10).
Wiring
- Add switches to both Pro Micros across B3 and B6 pins
- Add pull-up resistor to left side between VCC and F6
- Add pull-down resistors to right side between GND and F6
- Connect the following pins on both sides together: D0, D1, GND, VCC
- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
- Wire Di of RGB strip for each half to D3