mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/users/drashna/process_records.c
Drashna Jaelre 58a5030661
[Keymap] Drashna's Improve OLEDs and custom Split code (#14063) 
* Fill the oleds with right mods

* Enable double mods on x32 oleds

* Disable forced NKRO

* Make oleds fancy only on good MCUs

* Overhaul oled display

* Further enhance oled, with kitty!

* Final oled form

* Not working transport

* Transport id of woring

* Add acceleration

* fix button placement for accel macro

* Fix accelartion location and behavior

* Remove OLED sync code

* Fix alignment issue

* Remove audio hack

* Fix up zima keymap

* Add matrix slave scan function and cleanup drashna.h

* Clean up user space

* Allow userspace sync to be disable-able

* Fix weird issue with audio

* Fix alignment issue with user split sync

* Disable second rgb matrix task

* Disable additional animations

* Change dynamic keymap settings

* Hacky fix for borked corne

* Add Blackpill (F411) support to tractyl manuform

* remove manual via eeprom reset

* Remove all references to rgblight twinkle

* Fix issues with config processing
2021-08-21 13:34:44 -07:00

207 lines
8.6 KiB
C
Raw Blame History

/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "drashna.h"
#include "version.h"
uint16_t copy_paste_timer;
// Defines actions tor my global custom keycodes. Defined in drashna.h file
// Then runs the _keymap's record handier if not processed here
__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
__attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; }
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// If console is enabled, it will print the matrix position and status of each key pressed
#ifdef KEYLOGGER_ENABLE
uprintf("KL: kc: 0x%04X, col: %2u, row: %2u, pressed: %b, time: %5u, int: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
#endif // KEYLOGGER_ENABLE
#ifdef OLED_DRIVER_ENABLE
process_record_user_oled(keycode, record);
#endif // OLED
if (!(process_record_keymap(keycode, record) && process_record_secrets(keycode, record)
#ifdef RGB_MATRIX_ENABLE
&& process_record_user_rgb_matrix(keycode, record)
#endif
#ifdef RGBLIGHT_ENABLE
&& process_record_user_rgb_light(keycode, record)
#endif
&& true)) {
return false;
}
switch (keycode) {
case FIRST_DEFAULT_LAYER_KEYCODE ... LAST_DEFAULT_LAYER_KEYCODE:
if (record->event.pressed) {
uint8_t mods = mod_config(get_mods() | get_oneshot_mods());
if (!mods) {
set_single_persistent_default_layer(keycode - FIRST_DEFAULT_LAYER_KEYCODE);
#if LAST_DEFAULT_LAYER_KEYCODE > (FIRST_DEFAULT_LAYER_KEYCODE + 3)
} else if (mods & MOD_MASK_SHIFT) {
set_single_persistent_default_layer(keycode - FIRST_DEFAULT_LAYER_KEYCODE + 4);
# if LAST_DEFAULT_LAYER_KEYCODE > (FIRST_DEFAULT_LAYER_KEYCODE + 7)
} else if (mods & MOD_MASK_CTRL) {
set_single_persistent_default_layer(keycode - FIRST_DEFAULT_LAYER_KEYCODE + 8);
# endif
#endif
}
}
break;
case KC_MAKE: // Compiles the firmware, and adds the flash command based on keyboard bootloader
if (!record->event.pressed) {
#ifndef MAKE_BOOTLOADER
uint8_t temp_mod = mod_config(get_mods());
uint8_t temp_osm = mod_config(get_oneshot_mods());
clear_mods();
clear_oneshot_mods();
#endif
send_string_with_delay_P(PSTR("qmk"), TAP_CODE_DELAY);
#ifndef MAKE_BOOTLOADER
if ((temp_mod | temp_osm) & MOD_MASK_SHIFT)
#endif
{
send_string_with_delay_P(PSTR(" flash "), TAP_CODE_DELAY);
#ifndef MAKE_BOOTLOADER
} else {
send_string_with_delay_P(PSTR(" compile "), TAP_CODE_DELAY);
#endif
}
send_string_with_delay_P(PSTR("-kb " QMK_KEYBOARD " -km " QMK_KEYMAP), TAP_CODE_DELAY);
#ifdef CONVERT_TO_PROTON_C
send_string_with_delay_P(PSTR(" -e CTPC=yes"), TAP_CODE_DELAY);
#endif
send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY);
}
break;
case VRSN: // Prints firmware version
if (record->event.pressed) {
send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY);
}
break;
case KC_DIABLO_CLEAR: // reset all Diablo timers, disabling them
#ifdef TAP_DANCE_ENABLE
if (record->event.pressed) {
for (uint8_t index = 0; index < 4; index++) {
diablo_timer[index].key_interval = 0;
}
}
#endif // TAP_DANCE_ENABLE
break;
case KC_CCCV: // One key copy/paste
if (record->event.pressed) {
copy_paste_timer = timer_read();
} else {
if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { // Hold, copy
tap_code16(LCTL(KC_C));
} else { // Tap, paste
tap_code16(LCTL(KC_V));
}
}
break;
#ifdef UNICODE_ENABLE
case UC_FLIP: // (ノಠ痊ಠ)ノ彡┻━┻
if (record->event.pressed) {
send_unicode_string("(ノಠ痊ಠ)ノ彡┻━┻");
}
break;
case UC_TABL: // ┬─┬ノ( º _ ºノ)
if (record->event.pressed) {
send_unicode_string("┬─┬ノ( º _ ºノ)");
}
break;
case UC_SHRG: // ¯\_(ツ)_/¯
if (record->event.pressed) {
send_unicode_string("¯\\_(ツ)_/¯");
}
break;
case UC_DISA: // ಠ_ಠ
if (record->event.pressed) {
send_unicode_string("ಠ_ಠ");
}
break;
#endif
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
if (record->event.pressed) {
userspace_config.rgb_layer_change ^= 1;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
eeconfig_update_user(userspace_config.raw);
if (userspace_config.rgb_layer_change) {
# if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
rgblight_enable_noeeprom();
# endif
layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
# if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
} else {
rgblight_disable_noeeprom();
# endif
}
}
#endif // RGBLIGHT_ENABLE
break;
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
case RGB_TOG:
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
# else
if (!record->event.pressed) {
# endif
# if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_DISABLE_KEYCODES)
rgblight_toggle();
# endif
# if defined(RGB_MATRIX_ENABLE) && !defined(RGB_MATRIX_DISABLE_KEYCODES)
rgb_matrix_toggle();
# endif
}
return false;
break;
case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
if (record->event.pressed) {
bool is_eeprom_updated;
# if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_DISABLE_KEYCODES)
// This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
if (userspace_config.rgb_layer_change) {
userspace_config.rgb_layer_change = false;
dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
is_eeprom_updated = true;
}
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
if (userspace_config.rgb_matrix_idle_anim) {
userspace_config.rgb_matrix_idle_anim = false;
dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
is_eeprom_updated = true;
}
# endif
if (is_eeprom_updated) {
eeconfig_update_user(userspace_config.raw);
}
}
#endif
}
return true;
}
__attribute__((weak)) void post_process_record_keymap(uint16_t keycode, keyrecord_t *record) {}
void post_process_record_user(uint16_t keycode, keyrecord_t *record) { post_process_record_keymap(keycode, record); }
Reference in a new issue View git blame Copy permalink