mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/machkeyboards/mach3
History
Ryan 3da6575e24
Move keyboard USB IDs and strings to data driven: M (#17859)
2022-08-03 17:15:43 +10:00
..
keymaps [Keyboard] Add MachKeyboards Mach3 (#14791) 2021-10-11 19:42:14 -07:00
config.h Move keyboard USB IDs and strings to data driven: M (#17859) 2022-08-03 17:15:43 +10:00
info.json Move keyboard USB IDs and strings to data driven: M (#17859) 2022-08-03 17:15:43 +10:00
mach3.c [Keyboard] mach3 LED index correction (#17110) 2022-05-16 22:02:14 -07:00
mach3.h [Keyboard] Add MachKeyboards Mach3 (#14791) 2021-10-11 19:42:14 -07:00
readme.md [Keyboard] Add MachKeyboards Mach3 (#14791) 2021-10-11 19:42:14 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Mach 3

A 3x3 macropad with RGB underglow. Note: It sets an output pin to high, which is the alimentation of the backlight circuit.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB
  • Keycode in layout: Press the key mapped to RESET if it is available

Make example for this keyboard (after setting up your build environment):

make machkeyboards/mach3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.