115 lines
3.5 KiB
C
115 lines
3.5 KiB
C
// Copyright 2021 KiwiKey (@KiwiKey)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 5
|
|
#define MATRIX_COLS 15
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
|
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
|
|
#define UNUSED_PINS
|
|
|
|
/* COL2ROW, ROW2COL */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
#define ENCODERS_PAD_A { F5 }
|
|
#define ENCODERS_PAD_B { F6 }
|
|
#define ENCODER_RESOLUTION 4
|
|
#define TAP_CODE_DELAY 10
|
|
|
|
#define RGB_DI_PIN B2
|
|
#ifdef RGB_DI_PIN
|
|
#define RGBLED_NUM 18
|
|
#define RGBLIGHT_HUE_STEP 8
|
|
#define RGBLIGHT_SAT_STEP 8
|
|
#define RGBLIGHT_VAL_STEP 8
|
|
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
|
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
#define RGBLIGHT_EFFECT_SNAKE
|
|
#define RGBLIGHT_EFFECT_KNIGHT
|
|
#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
#define RGBLIGHT_EFFECT_RGB_TEST
|
|
#define RGBLIGHT_EFFECT_ALTERNATING
|
|
#define RGBLIGHT_EFFECT_TWINKLE
|
|
/*== customize breathing effect ==*/
|
|
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
|
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
|
/*==== use exp() and sin() ====*/
|
|
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
|
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
|
#endif
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
//#define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
//#define BOOTMAGIC_LITE_ROW 0
|
|
//#define BOOTMAGIC_LITE_COLUMN 0
|