qmk_sweep_skeletyl/keyboards/keebio/bigswitchseat
James Young 2e0498080f
Migrate LOCKING_*_ENABLE to Data-Driven: K, Part 2 (#23769)
Affects:

  - `keebio/bamfk4`
  - `keebio/bdn9/rev1`
  - `keebio/bdn9/rev2`
  - `keebio/bfo9000`
  - `keebio/bigswitchseat`
  - `keebio/choconum`
  - `keebio/dilly`
  - `keebio/dsp40/rev1`
  - `keebio/ergodicity`
  - `keebio/foldkb/rev1`
  - `keebio/fourier`
  - `keebio/iris/rev1`
  - `keebio/iris/rev1_led`
  - `keebio/iris/rev2`
  - `keebio/iris/rev3`
  - `keebio/iris/rev4`
  - `keebio/kbo5000/rev1`
  - `keebio/levinson/rev1`
  - `keebio/levinson/rev2`
  - `keebio/levinson/rev3`
  - `keebio/nyquist/rev1`
  - `keebio/nyquist/rev2`
  - `keebio/nyquist/rev3`
  - `keebio/quefrency/rev1`
  - `keebio/quefrency/rev4`
  - `keebio/quefrency/rev5`
  - `keebio/rorschach/rev1`
  - `keebio/sinc/rev1`
  - `keebio/sinc/rev2`
  - `keebio/tragicforce68`
  - `keebio/tukey`
  - `keebio/viterbi/rev1`
  - `keebio/viterbi/rev2`
  - `keebio/wavelet`
  - `keebio/wtf60`
  - `keebsforall/coarse60`
  - `keebsforall/freebirdnp/lite`
  - `keebsforall/freebirdnp/pro`
  - `keebsforall/freebirdtkl`
  - `keebwerk/nano_slider`
  - `keebzdotnet/fme`
  - `keebzdotnet/wazowski`
  - `keyboardio/atreus`
  - `keycapsss/kimiko/rev1`
  - `keycapsss/o4l_5x12`
  - `keygem/kg60ansi`
  - `keygem/kg65rgbv2`
  - `keyhive/absinthe`
  - `keyhive/ergosaurus`
  - `keyhive/lattice60`
  - `keyhive/maypad`
  - `keyhive/navi10/rev0`
  - `keyhive/navi10/rev2`
  - `keyhive/navi10/rev3`
  - `keyhive/opus`
  - `keyhive/southpole`
  - `keyhive/ut472`
  - `keyprez/bison`
  - `keyprez/corgi`
  - `keyprez/rhino`
  - `keyprez/unicorn`
  - `keysofkings/twokey`
  - `keystonecaps/gameroyadvance`
2024-05-22 22:14:00 +01:00
..
keymaps
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: K, Part 2 (#23769) 2024-05-22 22:14:00 +01:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

Big Switch Seat

PCB for the Big Switch.

Make example for this keyboard (after setting up your build environment):

make keebio/bigswitchseat:default

Flashing example for this keyboard:

make keebio/bigswitchseat:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available