History

Ryan 5bd68e3695 Move single `LAYOUT`s to data driven (#20365 )		2023-04-12 13:42:51 +10:00
..
keymaps	Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211 )	2023-04-03 15:32:47 +10:00
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
ein_60.c	Move single `LAYOUT`s to data driven (#20365 )	2023-04-12 13:42:51 +10:00
glcdfont.c	[Keyboard] Fix font file for Ein 60 Keyboard (#14553 )	2021-09-21 22:39:19 -07:00
info.json	Move single `LAYOUT`s to data driven (#20365 )	2023-04-12 13:42:51 +10:00
readme.md
rules.mk	Move `RGB_MATRIX_DRIVER` to data driven (#20350 )	2023-04-08 18:08:08 +10:00

readme.md

Ein_60

The Ein_60 is a 50 key ergo style column stagger keyboard PCB with a combined split layout that is designed to fit into a standard 60% tray mount case. It has USB C and comes in either hotswap or soldered versions. (Soldered version is Alps and MX compatible.) It can have two encoders in either of it's middle keys and an OLED installed in the center below the plate. The PCB supports a bottom mounted KELIKING KLJ-1102 low profile buzzer speaker for audio effects. It has 38 side facing LEDs around the entire outside edge of the PCB for very bright RGB effects as well as solder points for LED strips. The Ein_60 is compatible with the majority of Planck keycap sets and can have a 1U only layout, two 2U and two 1U, or two 3U keys in the thumb cluster (or any combination of those).

When flashing the Ein_60 use: make ein_60:default:flash

Keyboard Maintainer: klackygears
Hardware Supported: The Ein_60 PCBs
Hardware Availability: Case Data & firmware

Make example for this keyboard (after setting up your build environment):

make ein_60:default

Flashing example for this keyboard:

make ein_60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.