History

Ryan e837a32b2b Move layouts for direct_pins boards to data driven (#19872 )		2023-02-19 18:55:12 +11:00
..
keymaps
config.h	Remove unused RGBLight defines from config.h (#19859 )	2023-02-17 08:13:41 +11:00
info.json	Move layouts for direct_pins boards to data driven (#19872 )	2023-02-19 18:55:12 +11:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

lemonpad

This is a QMK and VIA implementation for an atmega32u4 based adaptation of the Adafruit Lemon Keypad. By default it uses a Pro Micro, if you would like to use a different microcontroller please make sure you have the correct bootloader set.

Keyboard Maintainer: dari-studios
Hardware Supported: atmega32u4 based boards with the Caterina bootloader
Hardware Availability: https://learn.adafruit.com/qtpy-lemon-mechanical-keypad-macropad

Make example for this keyboard (after setting up your build environment):

make handwired/lemonpad:default

Flashing example for this keyboard:

make handwired/lemonpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available