mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/hineybush/h65_hotswap
History
Ryan ccb6c908dd
Remove SOFT_SERIAL_PIN for non-split boards (#19774) 
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
2023-02-08 23:57:42 +00:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
config.h Remove SOFT_SERIAL_PIN for non-split boards (#19774) 2023-02-08 23:57:42 +00:00
h65_hotswap.c Add h08_ocelot and h65 PCBs (#14054) 2022-02-20 00:21:18 -08:00
h65_hotswap.h Hineybush H65 Hotswap Layout Additions and Configurator Update (#16780) 2022-04-04 12:20:10 -07:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

h65 hotswap

h65 hotswap

A 65%, hotswap, USB 2.0 Type C PCB.

  • Keyboard Maintainer: hineybush
  • Hardware Supported: h65hs, Singa Kohaku
  • Hardware Availability: Singa Kohaku Group Buy

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

make hineybush/h65:default

Flashing example for this keyboard:

make hineybush/h65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.