History

marcostrauss 57bf00f28f ErgoDone: VID/PID/NKRO (#1872 ) * - Fancy default PID and option for corresponding VID. - Information about official VID/PID. - Correct manufacturer name. - NKRO enabled by default. * Resolved build error with `#ifndef FORCE_NKRO`.		2017-10-21 10:00:41 -10:00
..
keymaps/default
config.h	ErgoDone: VID/PID/NKRO (#1872 )	2017-10-21 10:00:41 -10:00
ergodone.c
ergodone.h
expander.c
expander.h
i2cmaster.h
matrix.c
readme.md	Make arguments redo, subproject elimination (#1784 )	2017-10-14 11:32:19 -10:00
rules.mk
twimaster.c

readme.md

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

Keyboard maintainer: Yu He
Hardware supported:
- ErgoDone v1.3 (tested)
Hardware availability:
- AliExpress
- KBDfans

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard.
To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):
```
hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex
```