mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/ms_sculpt
History
Jean Bernard ef633cf461
Added MS Sculpt ISO-layout conversion with STM32F401 (#17049)
2022-07-02 22:16:38 +10:00
..
keymaps/default Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
config.h Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
info.json Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
readme.md Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
rules.mk Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00
sculpt_iso.h Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 22:16:38 +10:00

readme.md

ms_sculpt

ms_sculpt_with_cold_dry_joints

MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill

  • Keyboard Maintainer: Jean Bernard
  • Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
  • Hardware Availability: Ebay

Make example for this keyboard (after setting up your build environment):

make ms_sculpt:default

Flashing example for this keyboard:

make ms_sculpt:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available