mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/linworks/fave65h
History
Ryan 7bfc2a367d
Move 65% layouts to data driven (#20308)
2023-04-04 15:20:10 +10:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
config.h Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
fave65h.c Move 65% layouts to data driven (#20308) 2023-04-04 15:20:10 +10:00
info.json Move 65% layouts to data driven (#20308) 2023-04-04 15:20:10 +10:00
readme.md Revert RESET-> QK_BOOT in Read Me files where applicable (#19262) 2022-12-09 03:12:49 +11:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

FAve 65H

The following is the QMK Firmware for the FAve 65H Hotswap PCB.

The PCB features:

  • QMK & VIA compatibility
  • Hotswap
  • Perkey and underglow RGB

Make example for this keyboard (after setting up your build environment):

make linworks/fave65h:default

Bootloader Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
  • Physical reset short: Briefly short the 2 pads labelled RESET on the back of the PCB
  • Keycode in layout: Press the B key on layer 1 which is mapped to QK_BOOT

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.