mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/phentech/rpk_001
History
Joel Challis 41948350e8
Migrate RGB Matrix config to info.json - NOPQ (#22866)
2024-01-10 09:55:09 +00:00
..
keymaps [Keyboard] Add rpk-001 keyboard (#21042) 2023-09-20 19:38:20 -07:00
config.h Migrate RGB Matrix config to info.json - NOPQ (#22866) 2024-01-10 09:55:09 +00:00
halconf.h [Keyboard] Add rpk-001 keyboard (#21042) 2023-09-20 19:38:20 -07:00
info.json Migrate RGB Matrix config to info.json - NOPQ (#22866) 2024-01-10 09:55:09 +00:00
mcuconf.h [Keyboard] Add rpk-001 keyboard (#21042) 2023-09-20 19:38:20 -07:00
readme.md [Keyboard] Add rpk-001 keyboard (#21042) 2023-09-20 19:38:20 -07:00
rpk_001.c Update keyboard LED driver configs (#22638) 2023-12-18 20:13:08 +00:00
rules.mk Migrate some EEPROM config to info.json (#22434) 2023-11-14 09:30:19 +11:00

readme.md

RPK-001

p9HNfPg.png

  • Keyboard Maintainer: JoyLee
  • Hardware Supported: RPK-001 PCB

Make example for this keyboard (after setting up your build environment):

make phentech/rpk_001:default

Flashing example for this keyboard:

make phentech/rpk_001:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available