mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/fjlabs/avalon
History
Ryan f4ba17c4a0
Move LED indicator config to data driven (#19800)
2023-02-17 13:14:29 +11:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
avalon.c [Keyboard] Add Trailblazer Avalon (#17568) 2022-08-29 11:22:54 -07:00
avalon.h [Keyboard] Add Trailblazer Avalon (#17568) 2022-08-29 11:22:54 -07:00
config.h Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
info.json Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
readme.md Remove more RESET keycode references (#18252) 2022-09-03 06:50:44 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Avalon PCB by FJLaboratories

The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.

  • Keyboard Maintainer: FJLaboratories
  • Hardware Supported: Avalon

Make example for this keyboard (after setting up your build environment):

make fjlabs/avalon:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available